insize ISM-DLC120, Руководство по эксплуатации

Страница: 15 / 16

3.12 Image view
A clearer image may be observed from TV set via AV output since there is limit
of pixels on the LCD screen (800×600). Similarly, the pixels of photo taken with the
microscope may reach 2048×1536, and the image will clearer under photo playback
mode or when observing photo from the computer after transmission.
.
Ⅳ
The maintenance of digital LCD microscope
For the sake of good microscope protection, it is required to avoid dust, water
and humidity intruding into the instrument, otherwise, the photo route and the
electronic circuit of microscope might be damaged. Moreover, the apparent grease
spot, finger print on the surface of optical kit, dust, dirt stains will effect the imaging
quality.
When the microscope is not in use, the microscope should be covered with a
clean sheath timely to prevent dust from entering in.
The product is suitable for application and storage indoor, with the environmental
humidity for operation and storage being 30%-80%. The environmental temperature
for operation and storage being 0
℃
- 40
℃
.
Optical section
The lens should be stored in a dry environment, and it is available to place it
in a container with drier agent.
If the surface of lens is attached with dust, please use an air blower ball to
clear it off.
If the surface of lens is attached with finger print, dirt, greasy stain or other
trace not available to use an air blower ball to clean, please use absorbent cotton
or lens paper dipped with a little alcohol or ether mixture (proportion 1:4) to
wipe off them lightly.
Notice: Under no any circumstances should the lens surface be dry cleaned,
otherwise the surface of lens may be damaged. Moreover, it is not allowed to
wipe the lens with water or other liquid solutions.
LCD screen
It is required to pay attention that no heavy pressure on the surface of color
LCD screen is allowable during operation and storage.