The Installation, Care and Use of Your New
“Hot-1” Hot
Water Dispenser
®
Warnings alert you to hazards or unsafe practices which could result in severe
personal injury or death.
Cautions alert you to hazards or unsafe practices which could result in minor personal
injury or product/property damage.
Please be certain that the person who installs or uses this
appliance carefully reads and understands the Safety
Instructions contained in this manual. This appliance pro-
duces extremely hot water. Do not allow children to operate
this appliance.
Safety Instructions
Important
Do not install this appliance in public areas where there
is unsupervised access to this appliance.
Capacity
1/3 gallon (1.3L), up to 40 cups
of 190°F*(88°C) water per
hour.
Electrical
115 volts A.C., 4.3 amps, 500
watts. Energy consumption .95
KWH/day. Three-wire cord &
plug provided.
Valve
Self-closing
Thermostat
Snap-action adjustable, factory
preset at approximately 190°F
(88°C).
Construction
Copper tank and valve. Copper
tubing.
Shipping weight
4 lbs. (1.8 kg.)
Specifications
How your hot water
dispenser works
Water is electrically heated to a brew-
ing/cooking hot 190°F (88° C)* by a
compact tank that mounts under the
sink. A thermostat maintains it at this
approximate temperature. When you
push the valve lever, cold water enters
the bottom of the tank and forces hot
water out of the faucet. The system is
vented so the tank is not pressurized.
*approximate
Valve lever design may vary
P/N42898 04/03
