Insinger GalleyMaster 135-LH-E, Техническое руководство

Страница: 14 / 81

GalleyMaster DOC Revision 2006
www.insingermachine.com 800-344-4802
INTRODUCTION
The GalleyMaster Dishwasher is a heavy
duty machine designed for daily use in a
naval shipboard environment.
ITEM CONTROL TYPE FUNCTION
1 Control power switch Off-On selector switch on control panel
Controls 24 vac power to control cir-
cuit
2 Control power light Yellow pilot light on control panel Signals control power state
3 Start switch Green pushbutton on control panel Starts pumps and conveyor(s)
4 Stop switch Red pushbutton on control panel Stops pumps and conveyor(s)
5 Wash tank heat indicator Yellow pilot light on control panel
Signals heating element energized in
wash tank
6
Rinse tank heat indicator Yellow pilot light on control panel
Signals heating elements energized
in rinse tank
7 Check conveyor indicator Red pilot light on control panel Signals conveyor jam
8 5 amp circuit breaker White circuit breaker on control panel
Over-current protection for control
circuit
9 Water ball valves Valve located on respective piping string Opens or closes incoming water line
10
Damper blade position
control
Handle (90° rotation) at vent duct connections Regulates vent duct exhaust flow
11
Wash tank water level
sight glass
Porthole located on front of wash tank Indicates level of water in wash tank
12
Rinse tank water level
sight glass
Porthole located on front of rinse tank Indicates level of water in rinse tank
13
Thermometers - wash
and rinse Dial gauges located on front of wash and
rinse tanks Indicate water temperature in wash
and rinse tanks
14 Thermometer - final rinse Dial gauge located on top of final rinse piping Indicates final rinse temperature
15
Pressure gauge - final
rinse
Dial gauge located on top of final rinse piping Indicates final rinse pressure
16
Temperature control -
wash and rinse
Round slotted adjustment knob located on the
wash or rinse tank temperature control board
in the control panel
Regulates temperature of the wash
and rinse tank water
17 Low water level switch Float switch located in wash and rinse tanks
Disables respective tank heating
element(s)
18
High water temperature
limit switch
Thermostat on wash and rinse heaters
Disables respective tank heating
element(s)
19
Final rinse temperature
control Slotted adjustment screw located inside the
lower front of the booster Controls temperature of final rinse
water
20
Final rinse high tempera-
ture limit switch Manual reset thermostat located inside the
lower front of the booster
Disables booster heating elements
CONTROLS AND INDICATORS (ELECTRICALLY HEATED MACHINES)
CAUTION:
The operator should become thoroughly familiar with the equipment and
these operating instructions prior to starting the machine.
13
PART 1 TECHNICAL INFORMATION