Insignia NS-LCD37HD-09, Руководство по обслуживанию

Страница: 6 / 43

4
3 Unit adjustments
Connect all the boards according to wiring diagram, connect with power and observe the display.
3.1 Method for using factory menu:
a) Press “INPUT”, “2”, “5”, ”8” and “0” in turn to enter level-one factory menu;
b) Press “CH+” and “CH-” to move the cursor to the adjustment page of the level-one factory menu
then press “OK” to enter;
c) Press “CH+” and “CH-” to move the cursor up and down;
d) When the cursor move to a certain adjust item, press “ VOL+” and “VOL –“ to adjust value;
e) Press “MENU” to exit to the level-one factory menu;
f) Press “EXIT” to exit the factory menu.
g) After exit the factory menu, press “SLEEP” to enter the factory menu again as long as power on.
h) “Power on mode” item of “Otherseting” menu: on= turn on; off =standby; memory=memory
function of turn on
3.2 White balance adjustment
3.2.1 Before adjustment
Before adjustment, the unit should keep working for over 30 minutes to be in a stable status.
a) In VGA channel, input VESA800*600/60HZ chessboard signal(VG848 Timing 854, pat 914),
enter user menu ADVANCE and perform AUTO to let picture display integrity, enter the factory
menu ADC Setting and perform ADC AUTO to do ADC correction.
b) In YPbPr channel, input 480i/60HZ 75%color bar and gray scale signal (VG848 Timing 968, PAT
918), enter the factory menu ADC Setting and perform ADC AUTO.
3.2.2 Four groups white balance adjustments (HDMI and VGA)
Allowable error range is below:
a) 12000K:
The white balance error range of the gray scale lower than 10IRE: X=(-15, +15) Y=(-50, +50)
The white balance error range of the gray scale between 10IRE and 30IRE: X=(-10, +10) Y=(-20,
+20)
The white balance error range of the gray scale higher than 30IRE: X=(-5, +5) Y=(-15, +15)
b) 9300K:
The white balance error range of the gray scale lower than 10IRE: X=(-15, +15) Y=(-50, +50)
The white balance error range of the gray scale between 10IRE and 30IRE: X=(-10, +10) Y=(-20,
+20)
The white balance error range of the gray scale higher than 30IRE: X=(-5, +5) Y=(-15, +15)
c) 6500K:
The white balance error range of the gray scale lower than 10IRE: X=(-15, +15) Y=(-50, +50)
The white balance error range of the gray scale between 10IRE and 30IRE: X=(-10, +10) Y=(-20,
+20)
The white balance error range of the gray scale higher than 30IRE: X=(-5, +5) Y=(-15, +15)
For BESTBUY, it needs to check if the white balance of 50IRE gray scale is up to the mustard at
9300K and 6500K (BBY channel of CA210).
3.2.2.1 ATV channel adjustment (same for AV, S-VIDEO)
Input 21-channel signal to the TV AIR, enter the factory menu “Color Temp”, set “Color Mode” to
COOL, 11-gray scale will display, fixed G GAIN, adjust R GAIN, B GAIN to let the color coordinate of
the ninth level be (272, 278); fixed G OFF, adjust R OFF, B OFF to let the color coordinate of the