8
NS-HWD1761
www.insigniaproducts.com
Step 3
:
Attaching the partitions to the top
1
Align the tops of the left partition (
5
) and the right partition (
6
) at 90° angles to the bottom side of the top (
1
) (as
shown), then push the partitions together with the top.
2
Push two hidden cams (
A
) into the large holes in the top of the left partition (
5
) and the right partition (
6
)
engaging the cam screws. Make sure that the arrows on the hidden cams point to the holes on the top edges of
the partitions.
NOTE:
Make sure to use hidden cams (
A
) rather than hidden cams (
E
).
3
Use a Phillips screwdriver to tighten the two hidden cams in the left partition (
5
) and the right partition (
6
), then
cover the hidden cams with cam covers (
K
) in the left partition.
You’ll need:
A
(4)
K
(2)
Phillips screwdriver