7
Metal and Glass TV Stand
www.insigniaproducts.com
Step 3: Attach the front and back frames
1
Turn the back frame assembly upright.
2
Attach the four middle connecting bars (F) to the front frame (C) using four 1/2” pan head screws (J) and a
Phillips screwdriver.
Note
: Do not fully tighten the screws until assembly is complete
3
Attach the two side frames (E) to the front frame (C) using four 1/2” bolts (I) and an Allen wrench. Make sure that
the brackets on the back frame assembly and front frame are on the same side.
Note
: Do not fully tighten the bolts until assembly is complete.
4
Fully tighten all the bolts and screws attached to the assembly.
You’ll need:
The metal brackets should be
on the same side.
J
1/2” pan head
screws (Qty. 4)
Phillips screwdriver
M
Allen wrench
I
1/2” bolts (Qty. 4)
NS-HMG1856_17-0621_MAN_V3_ENG.fm Page 7 Tuesday, August 1, 2017 8:01 AM