www.insigniaproducts.com
32
STEP 25: Attach the stopper to the top panel
You need:
If you place your TV on top of your console, you must follow these instructions to prevent your TV from tipping. Otherwise,
skip to STEP 27: Position the TV console and install the tipping restraint on page 34.
If your TV has one stand:
1
Remove the paper backing from the stopper (
), then place it in the stopper cut-out template on the top panel (
A
).
Press down on the stopper (
) to help it stick.
2
On the back of the top panel (
A
), carefully pull out the thumb tacks to remove the stopper template.
If your TV has two stands:
1
On the back of the top panel (
A
), carefully pull out the thumb tacks to remove the stopper template.
2
Align the template at the position where one of your TV’s stands or one of the feet will be located.
3
Remove the paper backing from the stopper (
), then place it in the stopper cut-out template on the top panel (
A
).
Press down on the stopper (
) to help it stick.
4
Repeat this process to attach the second stopper.
Acrylic stopper (2)
Pliers
Stopper backing
