Unit button
PACKAGE CONTENTS
• Digital Scale
• AAA batteries (3)
•
Quick Setup Guide
FEATURES
• Accurately measures and displays your body weight up to 330 lbs (150 kg)
• Backlit LCD panel is easy to read even in dim lighting
• Tempered glass body resists shattering and gives your scale a sleek, modern look
• Automatically turns off after displaying your weight for 15 seconds to save battery life
• Displays measurements in pounds, kilograms, or stones
• Slim design easily slips under furniture
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Tempered Glass
Digital Scale
NS-GLSSCW1
INSTALLING THE BATTERIES
1
Turn your scale over and open the battery compartment door on the back.
2
Insert three AAA batteries into the battery compartment, observing the polarity (+ and -) indicated inside the compartment.
Note
: When the symbol “Lo” appears, the device will power off in four seconds. Replace with a new set of batteries. Replace all
three batteries at the same time.
CAUTION:
• Do NOT mix the old and new batteries.
• Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
• Refer to local ordinances and recycling instructions regarding disposal of worn batteries.
• For the best performance and protection of your scale, use the authorized/specified batteries.
SETTING UP YOUR SCALE
Select measurement unit
With batteries correctly installed, press Unit button in the back of the scale to select measurement unit (pounds, kilograms, or
stones). The default measurement unit is “Pound”.
Note
: Put the scale on the flat hard ground when finishing the unit selection. Wait for a few seconds, then you can start using
the scale. If no one gets on the scale, the scale turns off automatically after about 15 seconds.
INITIALIZING YOUR SCALE
• Press the platform center and remove your foot.
or
Press the Unit button to turn on the scale. “0.0” will be displayed.
The scale is now ready for use. This initialization process must be repeated if the scale is moved. At all other times step directly
on the scale.
USING YOUR DIGITAL SCALE
The scale is equipped with SENSE On technology, so it's not necessary to turn on or turn off the scale. Just stand on the scale for
measurement.
1
Place the scale on a hard, flat surface.
2
Step onto the platform and stand still until the weight is stable. The display blinks twice, then the weight is locked.
3
The result is displayed for about 15 seconds, and then it turns off.
Note
: If there is no operation in 10 seconds the scale turns off automatically.
LCD display
Unit button:
Press to select desired unit in weighing mode.
or
Press to turn on the scale.
Battery compartment
