8
www.insigniaproducts.com
Assembling your file cabinet
STEP 1: Preparing the cabinet back and bottom
You need:
1
Insert three wooden dowels (
A
) into the edges of the upper back brace (
6
). Be careful not to insert the dowels into
the KD bolt holes.
2
Insert two large KD cams (
E
) into the outside holes in the upper back brace (
6
).
A
7.8 × 30 mm wooden
dowels (15)
D
KD Bolt (long) (3)
E
KD Cam (large) (5)
Phillips screwdriver
6
Upper back brace
4
Bottom panel
8
Bottom front trim
18
Connection bar (4)
V
KD 4 x 22
screw (8)
U
5.8 × 20 mm
wooden dowels (8)
5-1
Mid-cabinet horizontal brace
5-2
Mid-cabinet back brace
KD bolt hole. Do NOT insert dowels here.
Make sure that the arrow in
the cam housing is facing the
hole in the edge of the panel
