Insignia Digital Interval Timer
8
www.insigniaproducts.com
When you won’t be using the timer for an
extended period of time
The digital interval timer is not equipped with an off switch.
To reduce the drain on the batteries when it is not in use,
make sure that the TIMER ACTIVE, SET, and RELEASE
indicators are not displayed. The drain on the batteries
increases when these indicators are flashing. You may also
remove the batteries if the timer is not going to be used for
an extended time.
Turning on the backlight
•
Press the Lighting/lock button briefly to activate the
control panel backlight. The backlight remains on
for about six seconds. Pressing the arrow button
while the back light is on extends the timer for
another six seconds.
Locking the controls
•
To lock all controls except the Shutter-release and
Lighting/lock buttons, press the Lighting/lock
button until the lock icon (
) is displayed in the
control panel. To release the lock, press the Lighting/
lock button until the lock icon turns off.
Using the digital interval timer
Check the camera battery level and the number of
exposures remaining before using the timer (see the
camera manual for details). The timer continues to operate
even when no pictures can be recorded, such as when the
camera’s memory card is full. An AC adapter for the camera
(available separately) is recommended for longer sessions.
NS-DURT100_15-0521_MAN_V1_ENG - Narrow.fm Page 8 Tuesday, July 7, 2015 8:18 PM
