Suction lever
Attaching to a car window or
dashboard
1
Clean the window or
dashboard with a clean cloth.
2
Remove the clear film from the
suction cup.
3
Release the suction lever on
your magnetic mount, position
the suction cup in the window
or dashboard location you
want, then press the lever
down.
The mount adheres to the
window or dashboard.
V1 ENGLISH 19-0347
4
Remove the protective film
from the metal plate, then
press the adhesive side of the
plate to the back of your GPS
or mobile device.
5
Press the other side of the
metal plate to the magnetic
mount head.
6
Loosen the adjustment knob,
adjust the viewing angle, then
fully tighten the knob.
CAUTION:
Always loosen the
adjustment knob before
changing the viewing angle.
7
To remove the mount, push the
suction lever, then pull the
suction cup tab.
If the cup leaves a residue,
clean the window or dashboard
with water or window cleaner
and a clean cloth.
CAUTION:
Do not adjust your
mount while driving.
Removing your GPS
Hold your GPS or mobile device
securely, then pull it away from
your mount.
The metal plate stays attached
to your GPS or mobile device.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Adjustment knob
Suction cup tab
Metal plate
