9
Insignia 50-liter Electric Party Cooler
www.insigniaproducts.com
5
Dry the interior and exterior thoroughly with a soft cloth.
6
Turn the slits in the sealing ring and in the hinge rubber strip
downward when assembling the lid.
Storing your cooler
1
Turn off the cooler and unplug it from the wall outlet.
2
Remove all items.
3
Clean the cooler.
4
Leave the lid open slightly to avoid possible formation of
condensation, mold, or odor.
5
Store the cooler in a clean, dry location when not in use.
Troubleshooting
Caution
Use extreme caution with children. The unit should not be
accessible to child's play.
Caution
Do not try to repair your cooler yourself. Doing so invalidates the
warranty.
Problem
Possible cause
Possible solution
The cooler does not
operate
The cooler is unplugged.
Make sure that the cooler is plugged in and that the plug is
pushed completely into the outlet.
The fuse on the circuit is blown or
the circuit breaker is tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure.
If a power failure occurs, the cooler turns off. Wait until the
power is restored, then turn it on.
Beverages in the cooler
are freezing
The thermostat is set too cold.
Adjust the thermostat to a warmer setting.
Beverages in the cooler
compartment are not
cold
The lid has been opened too
often or was not closed properly.
Make sure that the lid is closed properly.
You have just added a large
number of warm items to the
cooler.
Allow time for the new items to cool, then check again.
The thermostat is set too warm.
Set the thermostat to a colder setting.
The voltage may be too low.
Plug it into an outlet that supplies 110V-120V, 60 Hz power.
NS-CC50SS6_15-0450_MAN_V1_ENG.fm Page 9 Friday, May 8, 2015 8:31 AM
