21
165-Can Beverage Cooler
www.insigniaproducts.com
Problems and solutions
Specifications
PROBLEM
SOLUTION
The cooler does not
operate.
• Make sure that the cooler is plugged in and that the plug is
pushed completely into the outlet.
• Check the house fuse/circuit breaker box and replace the
fuse or reset the circuit breaker.
• If a power failure occurs, the cooler turns off. Wait until the
power is restored, then turn it on again.
The cooler door does
not close completely.
• Adjust the shelf properly.
• Clean the door gaskets.
• Level the cooler with the leveling feet.
The cooler is not cold
enough.
• Make sure that the door is closed properly.
• Allow time for new beverages to cool, then check again.
• Set the control to a colder setting.
The cooler makes
unusual noises or
vibrates.
• Level the cooler with the leveling feet.
• Move the cooler out from the wall.
• Refrigerants circulating in the refrigerant lines will produce
sounds. This is normal and does not affect cooling.
• A buzz is generated by the running compressor, especially
when starting up or shutting down.
• The solenoid valve or electric switch valve will clatter. This
is normal and doesn’t affect operation.
Moisture is building
up in the interior of
the cooler.
• Make sure that the door is closed properly.
• Move the cooler to a dryer location.
• Condensation while in high humidity is normal. Wipe the
exterior and door seals with a towel to remove excess
moisture.
The cooler turns on
and off frequently.
• Make sure that your cooler is in a room that is 50 ~ 85°F (10
~ 29.4°C) or place your cooler in a cooler location.
• Make sure that the door is closed properly.
• Clean the door gaskets.
• Set the control to a colder setting.
Dimensions (D × W × H)
25.3 × 23.4 × 34.3 in. (64.2 × 59.5 × 87.0 cm)
Weight
105.8 lbs. (48 kg)
Power requirements
115V~60Hz
Current
.86 A
Ambient operating
temperature
54 ~ 109°F (12 ~ 43°C)
Cooler temperature range 34 ~ 50°F (1 ~ 10°C)
Power cord length
5.4 ft. (1.65 m)
Certifications
UL listed
