background image

73

 NS-32D420NA16 Insignia 32" 1080p 60Hz LED TV

www.insigniaproducts.com

One-year limited warranty - 
Insignia Televisions

Definitions:

Insignia Products ("Insignia") warrants to you, the original 
purchaser of this new Insignia-branded television ("Product"), that 
the Product shall be free of defects in the original manufacturer of 
the material or workmanship for a period of one (1) year from the 
date of your purchase of the Product ("Warranty Period"). For this 
warranty to apply, your Product must be purchased in the United 
States or Canada from a Best Buy or Future Shop authorized dealer 
of Insignia brand products only that are packaged with this 
warranty statement. 

How long does the coverage last? 

The Warranty Period lasts for 1 year (365 days) from the date you 
purchased the Product.  Your purchase date is printed on the 
receipt you received with the Product. 

What does this warranty cover? 

During the Warranty Period, if the original manufacture of the 
material or workmanship of the Product is determined to be 
defective by an authorized Insignia repair center or store personnel, 
Insignia will (at its sole option): (1) repair the Product with new or 
rebuilt parts; or (2) replace the Product at no charge with new or 
rebuilt comparable products or parts. Products and parts replaced 
under this warranty become the property of Insignia and are not 
returned to you. If service of Products or parts are required after the 
Warranty Period expires, you must pay all labor and parts charges. 
This warranty lasts as long as you own your Insignia Product during 
the Warranty Period. Warranty coverage terminates if you sell or 
otherwise transfer the Product. 

How to obtain warranty service? 

If you purchased the Product at a Best Buy or Future Shop retail 
store location and your television Product has a screen size of less 
than 42 inches, please take your original receipt and the Product to 
any Best Buy or Future Shop store. Make sure that you place the 
Product in its original packaging or packaging that provides the 
same amount of protection as the original packaging. If you 
purchased the Product from a Best Buy or Future Shop online web 
site, mail your original receipt and the Product to the address listed 
on the web site. Make sure that you put the Product in its original 
packaging or packaging that provides the same amount of 
protection as the original packaging. 
To obtain in-home warranty service for a television with a screen 42 
inches or larger, in the United States call 1-888-BESTBUY, Canada 
call 1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents 
will diagnose and correct the issue over the phone or will have an 
Insignia-approved repair technician dispatched to your home. 

Where is the warranty valid? 

This warranty is valid only in the United States and Canada at Best 
Buy branded retail stores or websites to the original purchaser of 
the product in the county where the original purchase was made. 

What does the warranty not cover? 

This warranty does not cover: 

Customer instruction/education 

Installation 

Set  up  adjustments 

Cosmetic  damage 

Damage due to acts of God, such as power surges

Accident(s) 

Misuse, unintentional or intentional 

Abuse, unintentional or intentional

Negligence 

Commercial purposes/use, including but not limited to use in 
a place of business or in communal areas of a multiple 
dwelling condominium or apartment complex, or otherwise 
used in a place of other than a private home.

Modification of any part of the Product, including the antenna 

Plasma display panel damaged by static (non-moving) images 
applied for lengthy periods (burn-in). 

Damage due to incorrect operation or maintenance 

Connection to an incorrect voltage or power supply

Outages, static or other problems with over-the-air reception 
of television broadcast signals. 

Attempted repair by any person not authorized by Insignia to 
service the Product 

Products sold "as is" or "with all faults" 

Consumables, including but not limited to batteries (i.e. AA, 
AAA, C etc.)

Products where the factory applied serial number has been 
altered or removed 

Loss or Theft of this product or any part of the product

Failures or Damage caused by any contact including but not 
limited to liquids, gels or pastes.

Up to three (3) pixel failures (dots that are dark or incorrectly 
illuminated) grouped in an area smaller than one tenth (1/10) 
of the display size or up to five (5) pixel failures throughout 
the display. (Pixel based displays may contain a limited 
number of pixels that may not function normally.)

Problems with delay in motion or action of video images 
while playing first-person style video games.  

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS 
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA 
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED 
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, 
LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR 
LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS 
WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND 
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT 
LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH 
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, 
WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, 
PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON 
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE 
LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU 
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, 
WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. 
Contact Insignia: 
For customer service please call 1-877-467-4289 

www.insigniaproducts.com

 

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China 

Содержание NS-32D420NA16
















































































Отзывы: