Insignia NS-24E200NA14, Руководство пользователя

Страница: 68 / 72

64
NS-24E200NA14 Insignia 24" LED TV
www.insigniaproducts.com
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
One or more
channels do not
display.
• Make sure that the channels are not
blocked. See “ Setting parental
control levels ” on page 50 .
• Make sure that the channels are not
hidden. The channel may have
been deleted from the channel list.
You can tune to the channel by
pressing the number buttons or
you can add the channel back to
the channel list. See “
Hiding
channels ” on page 46 .
• If you are using a cable or satellite
box, use the remote that came with
that box to change channels.
• Make sure that you have the correct
input selected to view channels
from the cable or satellite box.
• If you are using an antenna, the
digital channel signal may be low.
To check the digital channel signal
strength, see “
Checking the digital
signal strength ” on page 47 .
Password is lost.
• Enter 9999 to access parental
controls, then set a new password.
See “
Setting or changing the
password ” on page 48 .
Some settings
cannot be
accessed.
• If a setting is grayed, the setting is
not available in the current video
input mode.
TV cabinet creaks.
• When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand or
contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons
do not work.
• Make sure that the Button Lock
option is set to Off . See “ Locking
control buttons ” on page 49 .
• Unplug the power adapter, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps turning
off.
• Make sure that the sleep timer is
not turned on. See “ Setting the
sleep timer ” on page 56 .
A retail banner is
displayed.
• You selected “Retail Mode” when
you ran the TV setup wizard. Reset
your TV to the factory defaults,
then select
Home Use Mode on
the What is your viewing
environment screen. See “ Restoring
settings to the defaults ” on
page 61 .
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
Problem Solution
Without stand
22 × 2 × 13.5 in. (56 × 5.1 × 34.3 cm)
8.14 lbs. (3.7 kg)
With stand
22 × 5.5 × 15.1 in. (56 × 14 × 38.4 cm)
8.58 lbs. (3.9 kg)
Screen size measured
diagonally
23.6 in.
Display type LED
Panel 60 Hz vs.120 Hz 60Hz
Display resolution 720p
Panel resolution 1366 (H) × 768 (V)
Aspect ratio 16:9
Contrast ratio
(typical)–panel 2000:1
Dynamic contrast ratio–
list value
24,000:1
TV brightness (minimum)
cd/m2
175 nits
Comb filter 3d y/c digital
Response time 8 ms
Horizontal viewing angle 160°
Vertical viewing angle 160°
HDMI suggested resolutions 1080p, 1080i, 720p, 480p, 480i
Component video suggested
resolutions
1080i, 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
1 (side)/1 (back)
E-EDID compliant
HDCP compliant
Component video 1 (side)
Composite video
1 (side)
Shared with component Y
Shared audio (component
and composite)
Yes
S-Video No
PC/VGA 1 (back)
3.5mm PC audio input 1 (back)
DVI
1 (back)
HDMI 1/DVI jack
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable 1 (back)