www.insigniashowers.com
Last Modified: 16/03/2022
04
•
Scissors
•
Knife
•
Spirit Level
•
Tape Measure
Tools Required
Voltage Rating 220
-
240AC
Frequency Rating 50Hz
Power Rating 6097 Watts
Amperage 25.404 amps
Always consult a qualified Electrician before connection as to suitability
Always Obtain Relevant Certification (minor Works Part P etc)
This Sauna
MUST NOT
be directly connected to house sockets
Your electrical contractor will understand
ALL
legal requirements of connection before
undertaking any work or installation.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF
Note for electrician:
1) Connect within current laws and IP directives. Subject to room location.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service
box.
Always
use protection against electrical surge. Your shower should be treated the same as a
home computer. A surge protector should eradicate the possibility of either the transformer or
control panel being burnt out.
Subject to connection type, electrical work needs to be signed off by a fully qualified operative
by law. Failure to adhere to this will not only void your electrical warranty for your sauna, but
could void your house insurance
Electrical Requirements Sauna Model No KY3000
You will require:
•
Philips Screwdriver
•
Electric Drill
•
Safety Gloves
•
Safety Glasses