www.insigniarange.com
Last Modified: 13/09/2017
20
Ozone (o3)
Unscrew the chrome pepper pot end and drop the white box
upside down into the rear hole as shown in the image. Now
from the inside of the shower re
-
attach the chrome pepper
pot end and tighten.
Monsoon Head
Attach the grey hose from your valve to the inner black tube
using PTFE tape (please note this only needs to be hand
tight. Over tightening will snap/damage the inner black
tube)
Hand Shower
Attach the chrome riser bar to the
glass wall ensuring the water inlet is
inserted through the lower large hole
and hand tightened from the rear
side.
Now tighten the chrome shower
holder ensuring that this will take the
hand shower itself without falling
(please note over tightening will pre-
vent the holder from sliding up and
down)
