www.insigniarange.com
Last Modified: 18/12/2017
13
Step 3 (Continued)
The next step is to attach both front uprights to the curved rails using
the
ST35
screws as shown in the picture to the left
PLEASE NOTE
The screw head needs to bypass the OUTER hole. If this does not
occur please bore out the outer hole only by about 2
-
4mm
Your front metal work should now look like this
Step 3 (Continued)
Please Note:
With the groove sitting on the tray, you need to
have the
“
U
”
shaped channel facing inwards to
allow the glass to be inserted correctly.
