www.insigniarange.com
Last Modified: 07/10/2015
10
Step 2
Push the
“
U Shape
”
glass seal onto each side of the glass panels prior to insertion
into the frames.
The next step is to attach both front fixed glass panels. In order to do this take the
glass panel and offer it up to the upright as shown by the arrows.
Step 3
Attach both front uprights and the top rail. In order to do this insert the front uprights
over the glass seal as push on tightly as directed by the arrows in the image. The
columns are handed and can only fit one way.
Now place your completed front frame on the front of
the shower tray as per the image on the right
IMPORTANT! When fitting the top rail ensure the wires
from the column lights are held against the back of the
grey plastic clips poking out of the top. The rail is
designed to sandwich the wires between the front of the
rail and the back of the grey clips.
Now attach the top rail (wide rail with logo) and then screw
into place using the
ST55
screws
Once the top rail is in place, secure the front uprights to the
top and bottom rails (from inside the cabin)
using
ST14
screws
Once you are happy with the alignment, run a bead of
silicone along the bottom of the frame
