www.insigniarange.com
Last Modified: 06/06/2018
17
Monsoon Head
Attach the grey hosing from your valve to the 90 degree push fit elbow. Secure in place using the jubilee clips found on the grey hosing. You should have one for each end
of the hose. Attach the grey hose from your valve to the inner black tube using PTFE tape (please note this only needs to be hand tight. Over tightening will snap/damage
the inner black tube)
Handle
Ensuring that the inner thread is protruding out from the handle far enough, place the handle on the outside of the door and secure by tightening the inner chrome knob to
the protruding inner thread.
Steam Pod
Insert the pod from the inside of the shower and attach
large white nut from the rear.
