Insignia D300a, Руководство пользователя, Страница: 8 / 29

FIND A PLACE TO SET UP YOUR NEW SYSTEM
It's impor tant that you:
• Choose a good location to set up your computer so that both you and your new
computer are safe. Make sure your working position is comfor table and promotes
good posture while you're at your computer.
• Place you computer on a sturdy desk or table, one strong enough to suppor t the
weight of your computer system and all peripherals.
• Flat and hard sur faces are best; soft sur faces like fabric or carpet can encourage
static electricity, which can damage the electrical circuits in your computer.
• Make sure that air can freely flow around your computer and monitor. Restricted
air flow can cause overheating.
• Keep your computer away from direct sunlight, extreme heat or cold, and moisture.
• Always use a grounded 3-hole outlet to prevent electrical shor ts or fires.
• Do not operate your computer with any side, front, or back cover(s) removed.
• Check the voltage selector on the back of the computer just below the AC power por t.
The selector should be set to the correct local AC power supply. In the United States,
it must be set to “115V”.
CONNECT THE KEYBOARD AND MOUSE TO YOUR COMPUTER
The keyboard cable has a purple plug that
matches the purple keyboard por t on the back
of your computer, and the mouse has a green
plug that matches the green mouse por t.
Connect both of these cables, taking care to
align the raised section on each of the plugs
with the notches on the por ts.
Insignia User Manual
7
singlepages 8/10/04 1:38 PM Page 7