INSIGHT 4K Dual LED Series, Инструкция по установке и быстрому запуску

Страница: 70 / 84

page 64
Digital Projection INSIGHT 4K Dual LED & Quad Series
Reference Guide
APPENDIX E: GLOSSARY OF TERMS
Rev B June 2016
Appendix E: Glossary Of Terms
1080p
An HDTV resolution which corresponds to 1920 x 1080 pixels (a widescreen aspect ratio of 16:9). 1080p has half the horizontal and
vertical resolution of UHD .
2K
A resolution which corresponds to 2048 x 1080 pixels (approximately a 1.9:1 aspect ratio ). 2K has half the horizontal and vertical resolution
of 4K , therefore a 4K projector can display 2K images by pixel and line doubling, without distorting the geometry of the image.
3D active glasses
Wireless battery-powered glasses with LCD shutters. Synchronization information is communicated to the glasses by means of an infrared
(IR) or radio frequency (RF) emitter which is connected to the Sync Out terminal on the projector. IR or RF pulses are transmitted by the
emitter to signal when the left eye and right eye images are being displayed. The glasses incorporate a sensor which detects the emitter’s
signal and synchronises the left and right eye shutters with the projected image.
3D passive glasses
Passive glasses do not require a power source to work. Light with left-hand polarisation can pass through the left lens and light with right-
hand polarisation can pass through the right-hand lens. These glasses are used in conjunction with another device which polarizes the image,
such as a
ZScreen
.
4K
A
resolution
which corresponds to 4096 x 2160
pixels
(approximately a 1.9:1
aspect ratio
). 4K has twice the horizontal and vertical
resolution of 2K .
Adjust lines
A pattern applied to the image where its edge is to be blended with another image. Adjust lines are used to position the projectors in the array
during the edge blend process.
Notes