Inseego Skyus DS, Руководство по установке

Страница: 12 / 15

11
Skyus DS Installation Guide
Inserting and Ejecting SIMs
The Skyus DS comes with a multi-purpose tool that you can use to insert and eject SIMs, shown below. (The tool also
serves as a SIM select plug, which activates SIM slot 2.)
Figure 14: SIM Insertion/Eject and SIM Select Tool
To remove a SIM, gently push the SIM with the edge of the tool and pull it out by hand.
Figure 15: Removing a SIM
To install a SIM, insert it with the label side up and press the SIM with the edge of the tool or your thumbnail until it
latches into place.
Switching the Active SIM
If Two SIMs Are Already Installed
If your Skyus DS is already equipped with dual SIMs, you can switch from one active SIM to the other without
accessing the SIM slots; however, switching the active SIM requires that you reprogram, or “flash,” the firmware if the
second SIM is activated with a different carrier than the first. Follow the steps below to switch SIMs in a dual SIM
device.
1. Insert the SIM select plug into the jack on the back panel, as shown below. This causes slot 2 to become the
active SIM slot.
SIM Select Plug
SIM Insertion/Eject Tool