Page | 11
Please click
''Yes''
to restart the switch.
2.
Hardware Reset:
To perform a hard reset of the system, the Reset Switch is located on the left side of
PoE 1
Ethernet
Connector, and please hold and press the RESET Switch for 9 seconds. The system will reset automatically. Please
be very cautious about the internal wires and cables and
DO NOT CHANGE or INTERFERE ANY OF THE INTERNAL
WIRES AND CABLES TO PREVENT DAMAGES TO THE SYSTE
M.
Installation & Mounting:
You can mount the system with one of the two ways:
1.
Wall Mount
Wall Mount Kit, Standard Accessory
2.
Pole Mount
(Optional Accessory, MMK001 Pole Mount Kit)
