Inscape Data Link Power LPS2800-T2 Series, Руководство пользователя

Страница: 7 / 11

Page | 7
Power Input Installation:
The system supports DUAL POWER INPUT REDUNDANCY:

The WPCK0001 Waterproof Power Cable has five colored wires, i.e., Red, Black, Yellow, Blue,
and Green Wire

Wire polarity and AC/DC assignment are based on the following wire color scheme:

110 ~ 240V AC: Yellow (AC/N ), Green (AC/L ), Blue Unused

48V DC: Red (+), Black ( – )

AC Power can be used as the main power input, or you can use the DC power as either a
backup power or main power input when the AC power is not available

After the AC power or DC power connected, the switch will automatically initialize, and SYS LED
lights status will turn ON
PoE Installation:
1. Before the PoE installation, please ensure the following:
I. All PD devices, i.e., PoE Clients, meet the power requirement of the connecting devices.
II. All PD devices, i.e., PoE Clients, match with the power receiving device power pinout
specification (1/2+ & 3/6–)
2. Connect the network devices with network cables to the POE switch port though WECK0001
Waterproof Ethernet Connector, Figure 2, an outdoor grade Ethernet cable with UV resistant is
highly recommended,
Figure 2 : WECK0001 Waterproof Ethernet Connector
Route the outdoor Ethernet cable through the WECK0001 and refer to the following assembly
structure, Figure 3:
Figure 3 : WECK0001 Waterproof Ethernet Cable Assembly