Inscape Data AirEther BR3000 Series, Руководство пользователя

Страница: 82 / 123

SB3000 & BR3000 Series User
’
s Manual
`
Rev. 1.1 (July, 2012) 82
5.13.3 Administrative and Read-only Account
In this section you can modify the administrator password to protect your device from unauthorized
con
figuration. The default administrator’s password should be changed on the very first system setup:
Administrator Username: specifies the name of the system user.
Current Password: administrator is required to enter a current password. It is required for Password or
Administrator Username change routine.
Default administrator login credentials:
•
User Name: admin
•
Password: password
New Password: new password used for administrator authentication should be specified.
Verify Password: new password should be re-entered to verify its accuracy.
Click Change button to save the changes.
5.13.4 Enable Read-Only Account
Read-Only Username
Password: new password used for read-only administrator authentication should be specified.
5.13.5 Configuration Management
Backup Configuration: click Download button to export the current configuration to a file.
Upload Configuration: click Browse button to navigate to and select the new configuration file
or specify the full path to the configuration file location.
Activating the Upload button will transfer new configuration file to the system.
New configuration will be effective after the Apply button is activated and system reboot cycle is
completed. Previous system configuration is deleted after Apply button is activated. It is highly
recommended to backup the system configuration before uploading the new configuration.
Use only configuration backups of the same type device - configuration backed up from Pow-
erStation2 suits only PowerStation2, but not LiteStation2 or LiteStation5! Behavior may be