Inscale IBC-15, Руководство пользователя

Страница: 13 / 20

© Inscale Ltd. 2011 p a g e
11
•
Zero the scale by pressing the [Zero] key if necessary. If a container is to be
used, place the container on the scale and tare as discussed earlier.
•
Place a known quantity of items on the scale. After the weight display is stable,
enter the quantity of items using the numeric keys followed by pressing the
[Sample/Blight]
key.
•
The number of units will be displayed on the “Total” display and the
computed average weight will be shown on the “Unit Weight” display.
•
As more items are added to the scale, the weight and the quantity will
increase. If the function “ASPL” is enabled (see section 6.1) the unit weight
will be automatically recalculated when an additional mass less than the
current count is added.
•
If the scale is not stable, the calculation will not be completed. If the weight is
below zero, the
“Total” display will show negative count.
Entering a known Unit Weight
•
If the unit weight is already known then it is possible to enter that value using
the keypad.
•
Enter the value of the unit weight using the numeric keys followed by pressing
the
[U W/Units] key. The “Unit Weight” display will show the value as it was
entered.
•
The sample is then added to the scale and the weight will be displayed as well
as the quantity, based on the unit weight.