Page
3
Summit Console Assembly Guide - REV E
Unpacking your Summit Console
Unpack your Summit™ console components, use care if using a knife to open packages that you
don't damage any contents. Inspect for any shipping damage. If shipping damage or defects are
suspected contact Inracks Inc. Immediately. Some components can be heavy and may require
help in handling.
Summit™ Console Assembly
Recommended tools:
Electric screw gun with a #2 Phillips tip
Two levels 18 - 24 inch long, one for left to right measurements and one for front to back
measurements
1/4" socket wrench or nut driver
3/4" wrench (for slat wall configurations)
Legs and Anti-Sag Bars
Place the work surface face down on the floor. It's recommended that you use cardboard or other
material to protect the work surface from potential damage while it's resting face down on the
floor. See figure (1) for pilot hole identification.
figure (1)
Pilot Hole Identification
