background image

Model SBF94

Eight Lamp School Bus

Electronic Flasher/Controller

Introduction

The Model SBF94 flasher/controller is a completely electronic micro-processor 
based device dedicated to the school bus warning light application. Its +12 volt 
outputs operate the stop arm, stop arm lights, and eight 80 watt warning 
lamps.  Inputs to unit include Master Switch, Override Switch, Start Switch and 
Service Door Switch.  Its industry standard functionality can accommodate 
both sequential and non-sequential modes of operation.

The design provides safeguards for over current, over temperature, short 
circuit, and loss of ground. A highly efficient current switching circuit is 
employed that produces very little heat loss. Advanced electronic circuitry 
employs surface mount technology (SMT). Its metal case is made of rugged 
anodized aluminum.

The SBF94 utilizes the Tyco/Amp Multilock Series 070 connector system.  The 
12-pin header (containing male pins) is integral to the flasher case.  The 12-pin 
connector plug (not supplied with the flasher) uses female pins.

Installation

The SBF94 should be located in a dry area such as the electrical compart-
ment of the school bus. It should be accessible to the lamp wiring, 12 volt 
power and ground. Mount the flasher on a clean, smooth metal surface to 
ensure the most effective heat transfer (the mounting plate removes heat from 
the flasher). 

Before wiring the flasher/controller, disconnect the 12 volt power from 
the chassis by removing the battery connection.

Wire the flasher/controller to the required lights, ground, power and other 
devices as shown in the Wiring Diagrams and Technical Description sections. 
Ensure that the power wiring to the flasher/controller is fused. The fuse and 
wire size must be of sufficient size to protect the wiring and prevent from false 
tripping due to the lamp loads and high inrush currents. It is very important to 
provide a good ground to the unit. The wiring harness connecting to the flasher 
should be properly secured to prevent damage from vibration and stress on the 
connections.

OWNERS MANUAL

Отзывы: