InPlay IN1BN-DKC0-100-C0, Руководство пользователя

Страница: 8 / 11

7 / 10
InPlay NanoBeacon™ IN100 Development Kit User Manual
J4
Connector for IOs
and power
Pin number Pin name Description
1 VDDQ OTP (eFuse) programming voltage supply
2 MGPIO4 IN100 MIX signal GPIO
3 GPIO3 IN100 digital signal GPIO
4 GPIO2 IN100 digital signal GPIO
5 GND Power ground
6 VBAT
System power supply, connect to IN100 VCC
pin
7 GPIO0 IN100 digital GPIO, Default is IN100 UART_RX
8 GPIO1 IN100 digital GPIO, Default is IN100 UART_TX
J5
External power
supply
External Power supply 1.1~3.6V input.
When have this power supply, please keep coin battery not
installed
，
and Programmer board SW1 switched to OFF
J8
Current
measurement
- for normal operation, jumper needs to be installed
- for current measurement, remove the jumper and have
ammeter connect to pin 1 and pin 2
P1 Chip_En
- active pull-up Chip_EN pin: connect pin 1 and 2
- disable pull-down Chip_EN pin: connect pin 2 and 3
K1 Chip Reset Chip reset