
9
Start
Fast Installation
Connect this unit and other apparatus according to “BASIC CONNECTIONS”. Plug the power cord,
press [STANDBY] button
(
no need for first connection
)
to start.
1.
Press [MENU] button to enter in main menu setup interface.
2.
Use [CH▲/▼] button to select ”Tool” and press [OK] button to enter in its interface.
3.
Use [CH▲/▼] button to select “Factory Setting” and press [OK] button to load factory default. The
default password is “0000”. This step
must be
done for first time use or after upgrade.
4.
Press [EXIT] button to back to main menu setup interface.
5.
Use [CH▲/▼] button to choose “Installation” and press [OK] button to enter in its setup interface.
The default password is “0000”.
a)
Use [CH▲/▼] button to select “Satellite List” and press [OK] button to enter in its interface.
Select satellite and press [OK] button to confirm selection. Press [EXIT] button to quit.
b)
Use [CH▲/▼] button to select “Antenna Setup” and press [OK] button to enter in its interface.
Set up “LNB Freq” and other parameters. Press [EXIT] button to quit.
c)
Use [CH▲/▼] button to select “Single Satellite Search” or “Multi Satellite Search” and press
[OK] button to enter in its interface. Set up parameters and move cursor to “Search” to start
searching.
Read Advanced Operation for more details.