background image

13

Advanced Operation

3.3 Local Time Setting

Region: Argentina/Brazil.

GMT Usage: OFF/User Define/By Region.

GMT Offset: GMT+12:00~GMT-11:30.

Summer Time: ON/OFF

Date: Enter in its setup interface, use [VOL◄/►] button to move the cursor and numeric

buttons to input date. Press [OK] button to confirm imputation.

Time: Enter in its setup interface, use [VOL◄/►] button to move the cursor and numeric

buttons to input time. Press [OK] button to confirm imputation.

Notes

1. “GMT Offset” is only activated in “User Define” mode.

2. “Summer Time” is only activated in “By Region” mode.

3. “Date” and “Time” is only activated when “GMT Usage” in “OFF” mode.

3.4 Timer Setting

Timer Mode: OFF/Once/Daily/Weekly/Monthly

Timer Service: Channel/Record. (It’s deactivated when timer mode is off.)

Wakeup Channel: The system will start automatically once the Timer Mode is activated.

Wakeup Date: Set up time to wakeup. Use navigation buttons to set up date.

Wakeup Time Set up time to wakeup. Use navigation buttons to set up time.

Duration: Set up the length of an alarm. Use navigation buttons to set up time.

3.5 Parental Lock

Default password is “0000”.

Menu Lock: OFF/ON

Password will be required for all levels of menu if the menu lock is ON.

Channel Lock: OFF/ON

Password will be required for locked channels.

Parental Lock: OFF/4-18 years, total 16 levels

New Password

Confirm Password

Use navigation buttons to set up new password.

3.6 OSD Setting

OSD Time out: 1-10 seconds.

OSD Transparency: OFF/10%/20%/30%/40%.

Load Default OSD Setting

3.7 Favorite

Totally 8 groups for optional.

4. Tools

Enter in “Tools” menu including 6 submenus which are listed below.

Information

Load Factory Setting

S/W Upgrade By OTA

Upgrade By USB

USB Device

Содержание X-2008 ISDBT Receiver




















Отзывы: