INOXPA TLS 1-25, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 5 / 48

ED.10.12/98 1. TLS Introduction 1.3
Safety instructions for maintenance, inspection and assembly.
It is the shop foreman's responsibility to see to it that maintenance, inspection and assembly work is performed by qualified
personnel once they have become familiar with the subject; they should read this manual very carefully.
Work should only be done on this machine when it is stopped; it is extremely important that the procedure for stopping the
machine be followed as set forth in this manual.
Those pumps should be de-contaminated which may contain hazardous agents.
Upon completion of the work, re-install the safety and protection devices.
Prior to re-initiating the operation of the machine, the instructions given in the chapter on "Operating Principles" should be
read.
Changes without prior authorization and production of spare parts .
No modification can be made to the machine without the prior consent of the manufacturer. For your safety, use spare parts and
accessories authorized by the manufacturer.
The use of other parts exempts the manufacturer from any and all responsibility.
Unauthorized operations.
The machine's safety is only ensured if it is used properly in accordance with the instructions given in this manual.
The limits for values specified in the data sheet cannot be exceeded under any circumstances.
Any change in operating conditions can only be done with the prior written consent of INOXPA.
WARRANTY.
We wish to point out that any warranty issued will be null and void and that we are entitled to an indemnity for any civil
liability claim for products which might be filed by third parties if:
•
operation and maintenance work has not been done following the corresponding instructions; the repairs have not been
made by our personnel or have been made without our written authorization;
•
modifications are made to our material without prior written authorization;
•
the parts or lubricants used are not original INOXPA parts/lubricants;
•
the material has been improperly used due to error or negligence or have not been used according to the indications
and the intended purpose.
The General Delivery Terms which you have already received are also applicable.
INOXPA SERVICE.
In the event of doubt or should you require a fuller
explanation on particular data (adjustment, assembly,
disassembly...), please do not hesitate to contact us.