3. Step 1 : Preparations before installing monitor
1. Make sure there are VESA holes 100x100mm or 75x75mm in the monitor. If not, the mount couldn’t be installed.
2. Remove the original fixed base of monitor. Be careful not to scratch the screen.
4. Step 2-A : Clamp
5. Step 2-B : Grommet
9
Desk
Desk
Tighten
Tighten
Keep the counterbore
side down
Desk
For table thickness:
20-120 mm.
Select right holes
according to the
thickness of desk.
For table thickness:
25-100 mm.
10
Drill or size of the hole
min-max diameter
8.5-70mm
U S E R ’ S G U I D E
EN
ARM 2
