— 23 —
reconnected to the computer after a time interval. This en-
sures that the software program does not overwrite regis-
ters in the encoder with data that it may have accumulated
from programming a different unit in the interim. Software
will ask for a READ when the encoder is connected, if that
option has been selected under
Help
.
— 24 —
Section V
TECHNICAL MATTERS
The Model 703 encoder is simple and small, utilizing mostly
surface-mounted (SMD) components, some of which are
‘application-specific’ and pre-programmed at the factory.
For all practical purposes this precludes servicing the unit
in the field. For these reasons, and also because of the
small format of this Manual, we have elected to dispense
with the schematic diagram, servicing instructions and a
parts listing.
Because it is so small and light (and because it is not in the
program signal path!), returning the 703 encoder for factory
servicing is the option that we encourage. Inovonics has
never considered factory repair charges as a significant
source of revenue; you will be astonished at how reasonable
our rates actually are!
Having said all that, our policy has always been one of ‘full
disclosure.’ We feel that, unless we are doing something
really nefarious, there should be no reason to hide informa-
tion from the user. With a clear conscience, and upon re-
quest, we will cheerfully provide additional documentation
and divulge all but the darkest secrets concerning the Model
703.
