6.13.19 168-04493-01 Rev A © Inovonics, 2019 - www.inovonics.com
3
3.2 Configure the Survey Receiver
Observe the following rules to navigate the display screens and select
options:
• Press the up and down buttons to highlight (capitalize) menu items on
the display screen.
• Press the enter button to select highlighted menu items.
• Press the exit button to exit the current display screen. The display will
return to the last higher-level display screen.
Note:
The EN4016SK survey receiver is set for North America by default. If
you are using an EN4016SK survey receiver to perform your site survey in
North America there is no need to configure the survey receiver’s
frequency band for your geographic area.
Note:
The EN4016SK survey receiver will turn itself off if no key is pressed
for 30 minutes, unless the survey receiver is in one of the Point Status
screens. If in one of the Point Status screens, the survey receiver will turn
itself off after five hours.
10.
Press the power button on the EN4016SK keypad to power on the
receiver. When the receiver information screen displays, press enter to
advance to the main menu.
Figure 8
Survey receiver keypad.
The Main Menu displays:
Figure 9
The Main Menu, Point Status highlighted
The Main Menu displays the model number and frequency band on the first
line. If the battery is low, the first line will also display the low battery
symbol. The low battery symbol will also display on many other screens.
The Main Menu offers the following choices:
Point Status Select to view point status. See section 4, “Perform a Site
Survey using Survey Transmitters” for more information.
Register Point Select to register a point. See section 3.3, “Register End-
Devices” for more information.
Delete Point This is selected to delete any particular point or all points that
have been registered.
Receiver Setup Select to configure the receiver.
11.
Press the Down button three times to highlight Receiver Setup.
Figure 10
The Main Menu, Receiver Setup highlighted
12.
Press enter to select. The Receiver Setup menu displays.
Figure 11
The Receiver Setup Menu, Sounder Vol Ctrl highlighted
Receiver Setup includes the following options:
Sounder Vol Ctrl Select to change the volume for the EN4016SK sounder.
The volume is given as a percentage, with a default of 100%. Press the up/
down buttons to raise or lower the volume.
Headphone Vol Ctrl Select to change the volume for the optional
headphones. The volume is given as a percentage, with a default of 100%.
Press the up/down buttons to raise or lower the volume.
Restore Defaults Select to restore all default receiver configuration
settings.
Caution:
Choosing restore defaults will erase all programmed points. If you
choose to restore defaults you will need to re-register all points.
Freq Band Setup If you are using an EN4016SK, select to choose the
frequency band appropriate for your geographic area. The options are: US,
Australia and New Zealand. US is the default. Use the Up/Down buttons to
highlight the selection for your geographic area and press Enter to select.
13.
Press the down button three times to highlight Freq Band Setup.
Figure 12
The Receiver Setup menu, Freq Band Setup highlighted
14.
Press enter to select Freq Band Setup. The Freq Band Setup screen
displays.
Figure 13
The Frequency Band Setup screen, United States highlighted
15.
Use the Up/Down buttons to highlight your geographic area, and press
Enter to select.
16.
Press the Exit button until the Main Menu displays.
A
Power Button
B
Up Button
C
Down Button
D
Enter Button
E
Exit Button
F
Backspace Button
A
B
C
D
F
E
