6.5.19 357-06982-02 Rev A © Inovonics, 2019
2
7
If using an existing EE4080 configuration file, open the
configuration file and proceed to step 10; if using a new EE4080
configuration file:
a. Insert a brand-name USB flash drive into either of the IP
gateway's USB ports.
b. Download the configuration file to the USB drive by pressing
the reset button on the IP gateway.
c. When the red LED is solidly lit or blinking, remove the USB
drive.
d. Insert the USB drive into a PC.
8
On your PC, open the configuration file from the USB drive.
• It will be named ee4080-XX-config-YYYYMMDD-
HHMMSS.yaml, where XX is the last two hex digits of the
Ethernet MAC address, as shown on the label on the back of
the house, and YYYYMMDD-HHMMSS is the current date
and time.
9
Enter the configuration information into the .yaml file:
• Enter TXIDs for the transmitters and any repeaters to be
registered to the IP gateway, referring to and overwriting the
examples provided in the file, separated by commas.
• Enter the desired host name of the remote server where the
IP-based application is running.
• As desired, change the default port from port 5500 to another
port.
• Configure the network connectivity as desired. By default,
only Ethernet is enabled with DHCP; WiFi is disabled. See
quickstart guides for configuration details.
10
Save the configuration file onto the USB drive as
ee4080-config.yaml.
11
Safely eject the USB drive and insert it into either of the USB
ports on the IP gateway.
12
Press the reset button on the IP gateway.
13
When the IP gateway has finished processing the configuration
file, indicated by the red LED being solidly lit or blinking, safely
remove the USB drive.