Inovonics 510, Инструкция по эксплуатации и техническому обслуживанию

Страница: 20 / 27

— — 16
analysis of the data or archiving is required, the user will have to
provide the requisite software.
S tarting the
S oftware
Assuming that the software was successfully installed as described
on Page 8, it can be started by one of two methods. If the Model
510 has been connected to the computers COM1 serial port,
simply open Windows Explorer, open the file 510RDS under the
(
C:)
directory, and double-click either
RDS
_
48.EXE
(European
RDS) or
RBDS
_
48.EXE
(US “RBDS”). This should automatically
open a DOS window. If this does not happen, or if the Model 510
is connected to a serial port other than COM1, the computer
should be restarted in the DOS mode. This is usually an option
under the Windows
S hut Down
menu, though with some operating
system versions it may be necessary to restart while holding the
Ctrl
key or
F8
key and selecting the proper startup option to obtain
a DOS prompt.
At the DOS prompt, navigate to the file and start it by typing the
appropriate command exactly as shown in the field below:
To Start: Type:
European RDS on COM1 C:\510RDS\RDS_48.EXE
European RDS on COM2 C:\510RDS\RDS_48/2.EXE
US “RBDS” on COM1 C:\510RDS\RBDS_48.EXE
US “RBDS” on COM2 C:\510RDS\RBDS_48/2.EXE
This should open a DOS window (which can be maximized if
running under Windows) that looks like this:
This screen tells which RDS functions and groups will be decoded.
Press the
Enter
key to open the decoding utility, which looks like the
example shown on the following page.