6
play, press the CD PLAY/PAUSE button once again. play will start from the exact position where it was
interrupted, and the CD LED display will stop flashing.
B. SKIP FUNCTION
To skip to the beginning of the current track or skip to another desired track, press “ TRACK FORWARD
” or
“ TRACK BACKWARD
”. When track 3 is being played, for example, press “ TRACK BACKWARD
”, then
track 3 will be played from the beginning again. To skip to the previous track, i.e. Track 2, press the “TRACK
FORWARD
” to skip to track 7 when track 3 is being played, for example, press the “ track forward “ key 4 times.
C. VARIOUS PLAYING MODES
1. Normal play mode
In the normal playback condition play will star at track No.1
2. Repeat play mode
This function allows all the tracks on a disc or the same track to be played repeatedly.
To repeat the same track:
-Press the REPEAT button before play or during play. The REPEAT ONE / ALL LED indicator will flash.
To repeat the entire disc:
-Press the REPEAT button two times; REPEAT ONE / ALL LED indicator lights up.
To release the repeat play function.
-Press the REPEAT button again. ( The REPEAT indicator is goes off).
3. Program Mode.
A. Press the PROGRAM button in the stop mode. The program LED will flash.
B. Press the Reverse Skip Button or the Forward Skip
button to select a track number, the select
track number will be shown.
C. Press the PROGRAM button, the first selected track is now programmed. The PROGRAM LED will flash.
D. Repeat step 2 and 3 to enter other tracks into the program up to a maximum of 20.
E. After entering a program, press the PROGRAM button to check the program content. The PROGRAM
LED will flash and the track numbers in order of the programmed tracks will be shown. At last, the
PROGRAM LED will stop flashing and the total track number on the disc will be shown. After the
program is played, press the PROGRAM button twice in the stop mode to check the program contents.
(Up to 20 tracks can be entered into the program memory, for play in any order desired. If you try to
enter more tracks, the track can not be selected. )
F. After entering a program, press the PLAY/PAUSE button, Program play starts from the beginning of
the first programmed track. The PROGRAM and PLAY/PAUSE LED will light, and the track number
which is currently playing will be shown.
G. Note: A program can not be entered during play. After entering a program, if the STOP button is pressed
before pressing the PLAY/PAUSE button, all of the programmed tracks will be cleared. The program can
not be changed. Clear the program and enter tracks into the program again. The programmed tracks can
not be played at random.
4. Random Play
- Press the RANDOM button to begin random play during play. Random play is played repeatedly until the STOP
button is pressed. The RANDOM button cannot be used in the program mode.
USB ENCODING FUNCTION
Plug a USB key into the slot
a) RECORDING
FROM
PHONO
Choose the track that you want to record and start playing. Press “REC” button on USB panel.
