Inovalley RETRO-05, Руководство пользователя

Страница: 5 / 9

AM/FM OPERATION
,,,,,,,, ,,
1. Set FUNCTION switch to TUNER mode, then choose needed band (AM, FM and FM
stereo) by BAND switch.
2. Search stations: Rotate the TUNER knob to choose request station, or press
PREV/NEXT keys to choose idea stations. User can also press one of the two keys a
little longer around 1.5s then the model will search automatically and it would stop at a
clearest station.
PHONO OPERATION
1. Press the Function switch to PHONO position. Then put a
record on the Platter lightly. In certain circumstances, 45
RPM adapter is needed;
2. Select the speed of record: 33 1/3, 45, 78rpm according to
vinyl to played.
3. Remove the stylus guard and push the lift lever upward to
raise the tone arm from the arm park, and then move the cartridge holder over the
record gently, now the platter will run automatically (default set of Auto/Manual stop
switch at ON position ). Then put down the lever, the tone arm would drop and touch
record surface gently. Now users can enjoy their favorite sons.
4. Select the auto/manual stop control: The turntable will stop automatically while the
song on the record finished when the switch at ON position. The other side it will
always play when it is at OFF position, this may helps to play some long recorded vinyl
which can not be played to the end by normal way.
5. Rotate the volume control knob to get desired sound level.
6. Push the arm lift lever up to raise the arm, now platter will still running but play will
pause. To continue the play, user just need to put down the lever.
7. Record vinyl: Firstly insert memory device (USB drive mp3 player or SD /MMC card).
When turntable is working, press the REC key on front control board of the unit, then
press SOURCE key to choose USB or CARD mode, later press REC key again now
recording works will begin. To finish the work just need to press the STOP key.
Note: Recorded file in mp3 format with 128bit.
CASSETTE TAPE OPERATION
1. Press the Function switch to TAPE position first.
2. Insert a pre-recorded cassette tape into tape slot, with the exposed side facing right.
By pushing, the cassette will slide into the tape mechanism and play start automatically.
Note: one end of tape will remain visible.
3. Adjust volume control to your desired sound level.
4. Depress the eject button completely in, the tape will be ejected from the slot.
5. Press the eject button half way to fast forward of the tape you are listening.
6. The tape will stop automatically when it comes to its end.