14
arrows to change the month setting;
• Press
[>]
button to highlight the DATE digits; toggle
“/\”
or
“\/”
arrows to change the day
setting;
• Press
[>]
button key to highlight the YEAR digits; Toggle
“/\”
or
“\/”
arrows to change the
year
setting; press [
] button to complete adjusting the date and the date format digits turn
into yellow, press
“/\”
or
“\/”
arrows to change for MM-DD (MONTH-DATE) or DD-MM
(DATE-MONTH);
• Press
[
] button to confirm and the date will display according the selected date format.
6.3 How to enable/ disable DAYLIGHT SAVING TIME
• Press
“/\”
or
“\/”
arrows to scroll up/down the list for DAYLIGHT SAVING TIME;
•
Default setting is: Enable. Press [
] button and the ‘Enable’ highlighted in yellow.
Toggle
“/\”
or
“\/”
arrows to change the setting between Disable and Enable;
• Press
[
] button to confirm and exit the setting.
.
6.4 How to change the setting for TEMPERATURE UNIT
•
Follow the similar steps to activate for appropriate setting mode;
• Toggle
“/\”
or
“\/”
arrows to change the setting between Celsius and Fahrenheit;
• Press
[
] button to confirm and exit the setting.
.
6.5 How to change the setting for PRESSURE UNIT
•
Follow the similar steps to activate for appropriate setting mode;
•
Toggle “/\” or “\/” arrows to change the unit setting between hPa, mmHg or inHg;
• Press
[
] button to confirm and exit the setting.
.
6.6 How to change the setting for LOCAL ALTITUDE compensation
•
Follow the similar steps to activate for appropriate setting mode;
• Toggle
“/\”
or
“\/”
arrows to change the unit setting between meter and foot;
• Press
[
] button to confirm altitude unit setting and proceed setting for height
compensation;
• Press
“/\”
or
“\/”
arrows to change the Altitude setting from -100 to +2500 meters; press
[
] button to confirm and exit the setting.
6.7 How to change the setting for SLIDE SHOW DURATION
•
Follow the similar steps to activate for appropriate setting mode;
• Toggle
“/\”
or
“\/”
arrows to change the time setting for 0, 5, 10, 30 or 60 seconds;
• Press
[
] button to confirm and exit the setting.
.
6.8 How to manually activate for RCC reception
•
Follow the similar steps to activate for appropriate setting mode;
• Toggle
“/\”
or
“\/”
arrows to change the default from ‘No’ into ‘Yes – reboot’
• Press
[
] button to confirm reboot, following screen shown up:
