IP Tau
User Manual v1.0
Inova-bg Ltd. 2016
Page 7 of 16
4.
Configuration of the main parameters
4.1.
General settings
Device Name
– Enter the name of the device. This value is used only for user convenience – to
identify devices if you have more than one connected to one network. Maximum length – 30
symbols.
Protocol
– The device can use either
Ademco Contact ID
or
LARS
protocol. When using
Ademco Contact ID
the device can receive data from communicator/dialer.
System
(only on LARS protocol) – System number – must range 0 to 3.
Account Number
– If working with
Ademco Contact ID
protocol – each of the four symbols
must be from 0 to 9 and/or from B to F.
If working with
LARS
protocol - The first 3 symbols must be from 0 to 7. The last symbol
must be from 0 to 9 or from A to J. In the monitoring software you can select how to use the
last symbol – as a digit or as a letter ( the digits 0 to 9 correspond to the letters A to J ).
Handshake Delay
– According to Ademco Standard this is the delay between phone number
dialing(from the control panel) and the Handshake response(from the IP Tau). The default
value of 16(16x100ms = 1600ms) is working fine with most of the control panels.
Send message if DC is lower than 10V
– Option that enables/disables generating of message
if the input voltage drops under 10V.
