inout RePlay 01, Руководство пользователя

Страница: 29 / 45

Replay User Manual v.
1.2
Page 28
8
SPECIAL FUNCTIONS
8.1 What is ID3 TAG information?
ID3 TAG is a small piece of information physically memorised inside the MP3 file (at the
beginning or at the end, depending on the version). The ID3 TAG can contains such
information as the name of the item, the author, the genre, etc. This information can be
changed using suitable software called ID3 Editor. There are many programmes of this
kind, and it is almost impossible to say which is the best.
8.2 Relay command from ID3 TAG
With REPLAY you can activate an output contact of the relay in a bistable mode,
introducing a suitable command in the field
TITLE 2 of the ID3 TAG of a file being
reproduced. If you put this command on a file which has been called up via palimpsest,
you can activate or deactivate the relay depending on the time. To activate this mode of
operation, you must use the parameter
ORI3 ( O utput R elay from I D 3 ) in the file config.txt,
according to the following table.
ORI3 (O utput R elay from I D 3)
ORI3
0= relay contact closed with file in reproduction.
1= relay activation via control on field TIT2 of the ID3 : #RELE_ON =contact
closed; #RELE_OFF = contact open. With this setting, the state of the relay
is modified ONLY when the reproduction of a file containing one of the two
commands of this setting starts.
ID3 TAG COMMAND DESCRIPTION
#RELE_ON =
The relay is activated: this condition persists whether the Replay is
working in play or in stop.
#RELE_OFF =
The relay is deactivated: this condition persists whether the Replay is
working in play or in stop.