Finished view
Pre-drill holes
3/8" dia
drill bit
A
A
Vanity
Front of
cabinet
Front of cabinet
C
Screw cap
B
Threaded rod
C
Screw cap
Emmet vanity
Emmet vanity
A
Emmet Bridge
Measuring
tape
Power drill
3/8" dia drill bit
Phillips
screwdriver
Pencil
C
Screw cap
B
Threaded rod
C
Screw cap
Phillips
screwdriver
INSTALLATION INSTRUCTIONS
A
x 1
Emmet 11 Bridge
IC4011-
B
x 8 Threaded
rod
Remove drawer from EMMET vanity.
See drawer removal below. (EMMET
vanity sold separately.)
1
2
Finish drilling the pre-drilled holes in
EMMET vanity. Make sure to drill
only
the side that will connect to EMMET
bridge.
3
Remove drawer from EMMET bridge
(A). See drawer removal below.
4
Attach EMMET bridge (A) to vanity by screwing the threaded
rod (B) into screw cap (C) as shown below. Use a phillips
screwdriver to tighten the screw caps.
Repeat step 1 and 2 using second vanity. Attach second
vanity to the other side of EMMET bridge (A) by repeating
step 4.
5
C
x 16 Screw cap
TOOLS REQUIRED