INSTALLATION INSTRUCTION MANUAL
LED WALLPACKS LIGHT,100-277VAC
Rev A June 2015
MODELS:
TLWMG120XWMZZ
Model number parameter list:
CAUTION: This product use an input 100-277VAC driver of wide range voltage,but the actual
working voltage is depend on the input voltage of the photocell that installed on the product.
Normally the input voltage of photocell is 120V/208V/240V/277V single range, and also have
120-277VAC wide range. Please pay attention when installation.
Item
A
Model
TLWMG120XWMZZ
Input Voltage
100-277VAC
Input Current
1.
66
A
Power Factor
> 0.9
Watt
120W
Weight
9.1Kg
1.Introduction:
This LED Wall-Packs light uses the latest in solid state lighting technology for long life, low
maintenance, and high efficiency.
The same as traditional HID lighting, it could be mounted a standard photocell on the
enclosure, to make it completely suitable for street lighting.
An internal power-factor-corrected switch-mode supply allows it to be used fromany
nominal 100V-277V, 60Hz AC supply without any variation in light output.
Suitable for use in the following locations:
Note: Save these instructions for future reference.
2.Installation:
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected,
and maintained by a qualified electrician only, in accordance with all applicable electrical codes.
Warning:
To avoid electric shock:
Warning:
To avoid explosion:
hazardous atmosphere.
Installation:
1.Wall Mount Installation
B
B
A
Dongguan Thailight Semiconductor Lighting Co., Ltd
Sanhui Ind. area, Cunwei, Hengli Town, 523000, DongGuan, GuangDong, China.
B
A
FIG.1
FIG.2
