Installation Steps:
Refer to the following diagram when you install the fixture.
1. Directly fix to mounting surface
1.Use expansion bolts to secure the fixture on mounting surface.
2. Keep enough length wires to ensure adjusting angle unhindered.
Connect wires into wiring terminal; white wire to “Neutral” terminal, black wire to “Live” terminal, green wire to
“Ground” terminal; and fix them by screws.
2. Mounting with a knuckle
Warning:
To avoid explosion:
•Make sure the supply voltage is the same as the rated luminaire voltage.
•Do not install where the marked operating temperatures exceed the ignition temperature of
the hazardous atmosphere.
•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
•Keep lens tightly closed when in operation.
No serviceable parts.
TLFLF15PXYYZ
Z
TLFLF30PXYYZ
Z
TLFLF50PXYYZ
Z
