Operating instructions
Setting up the speaker pole
1. Determine a suitable location and make sure the total weight of the pole and
speaker to be mounted does not exceed the maximum load capacity of the
subwoofer. Position the speaker pole safely on the subwoofer with an M20 or 35
mm socket (M20/35 mm adapter included). Setting up is only permitted on a stable
and flat surface. It may be necessary to provide an appropriate substructure.
2. Check the horizontal orientation of the subwoofer and if necessary, level the
ground surface or structure. Finally check the vertical orientation of the pole using
a spirit level.
4. Now place your speaker onto the speaker flange. Please note that the
maximum operating weight of 30 kg must not be exceeded.
5. Secure the speaker on the speaker flange by tightening the tommy screw of the
speaker.
6. Loosen the tommy screw of the crank mechanism (B).
7. Fold out the inner part of the crank (A) from the handle housing. By operating
the hand crank, adjust the height of the speaker until the desired position is
reached.
The information in this user manual is subject to change at any time without notice.
Versie:
2.0
Date of creation and author’s initials:
25-11-2019SM
Revisiedatum en initialen auteur: -
