background image

RACK SETUP

Innorack

®

 

IVC Mouse

Quick Start Guide

Supply blower(s)

Exhaust blower(s)

Controller mount 

with screws

Wall mount 

bracket(s)

Blower port plugs

Controller with cable

Power supply with cables

Power cable

RACK COMPONENTS

Single-sided rack only

Single-sided rack (1-sm, 1-lrg)
Double-sided rack (3-sm, 2-lrg)

Before proceeding please check the package to see if 

the items below have been included in the shipment.

F3

F1

F4

F5

F6

F7

F2

Controller Port

Rack to Blower Cable Port

Power Supply 

Port

Single-sided rack (1 power cable attached)
Double-sided rack (2 power cables attached)

1. INSTALLING THE POWER SUPPLY 

Verify the power switch is set to the off 
position ( O ). 

Double-sided racks mount the power supply 
on “Supply A” or “Exhaust B”. Single-sided 
racks mount the power supply on the Supply 
Blower end.

Secure power supply box to the top of 
the rack by placing the L-shaped bosses 
extending from the power supply box into the 
mating feature of the plastic blower supports 
(see 

F1

).

2. MOUNTING THE CONTROLLER

NOTE - Mounting instructions are for 
single-sided racks. Optional for double-
sided racks.

Attach controller mount bracket to the top 
of blower support section using the screws 
provided and a #2 Phillips Head screwdriver 
(see

 F2

).

Mount controller to the Controller Bracket
(see 

F3

).

3. INSTALLING THE BLOWERS 

Match the label on the front of the blower with 
the corresponding label on the side of the rack.

Tilt blower back and slide the two grooves in 
the back of the blower onto the two hooks at 
the back of the blower support (see 

F4

).

Check to make sure blower feet sit properly in 
feet cavities. Pull the front of the blower down 
until both latches on the blower engage with 
the blower support. Press down on the front of 
the blower to ensure that it is locked in place

Connect the Rack to Blower Cable Port
(see 

F5

).

4. CONNECTING THE CONTROLLER 
CABLE AND POWER SUPPLY CABLES

Attach the controller cable at the Controller 
Port and then connect the power supply 
cables at Power Supply Port as shown in 

F5

 & 

F6

. Single-sided systems will only attach one 

power supply cable into the Power Supply Port.

Attach the provided power cable to the power 
supply box (see 

F7

) and then plug the power 

cord into a wall outlet or a power strip  
(100-240 VAC).

Finally, ensure all the blowers and the 
controller are plugged into the rack prior to 
turning the system on and insert the Blower 
Port Plugs into any unused ports.

5. TURNING THE SYSTEM ON

Press the switch on the power box located 
on the top of the rack to the on position ( | ).

*Remove the wash caps before continuing with the setup process.

Отзывы: