TNi21
07 April 2016
Page
22/38
WARNING
FALLING PARTS
Reactive torque could cause the motor to move, tip or fall.
• Secure the motor firmly, so that it cannot come loose due to severe
acceleration.
If these precautions are not taken, the result could be death,
serious injury or damage to equipment.
CAUTION
HOT SURFACES
The surface of the motor can reach more than 70°C during use.
• Avoid contact with hot surfaces.
• Do not position inflammable or heat-sensitive components in
immediate proximity.
• Try to achieve an assembly that allows heat to dissipate efficiently.
• Run a test to check the temperature.
If these precautions are not taken, the result could be injury or
damage to equipment.
CAUTION
OVER-VOLTAGES
During braking phases, the motor generates over-voltages.
• Check that these over-voltages are acceptable to other equipment
connected to the same power supply.
• Preferably use an external circuit, to limit over-volting
In cases where braking is used intensively.
If these precautions are not taken, the result could be injury or
damage to equipment.
