EN
-
520-SW-120524
OSD Menu Setup
Menu button for choice
Move up and down by up and down button
Move horizontally or modify parameter by left and right button
ENTER:
:
:
OSD Menu Control
*Specialists press "Left, Right, Left, Right, Down" button enter superior menu.
LENS SELECT:
Move cursor to LENS SELECT, set LENS SELECT by Right and
Left button as :MANUAL,DC:DC Automatically. MANUAL FOR
MANUAL IRIS LENS,DC for AUTO IRIS LENS.
WHITE BALANCE:
Move to White Balance by Up and Down button, set White balance
by Left and Right button: AWB: ATW NORMAL; ATW DESAT;
ATW XTND;
AGC/SHUTTER:
Move cursor to AGC/SHUTTER by Up and Down button, set
AGC/SHUTTERby Left and Right Button as
:
FLUORESCENT:
Move cursor to FLUORESCENT by Up and Down button, set by
Left and Right button as: OFF; CRR; CRR2; EF. Cameras output
color rolling image under fluorescent lamp, CRR can restrain
colorrolling, keep the image stable.
DNR:
Move cursor to DNR by Up and Down button, set DNR by Left
and Right button as: OFF; LOW; MEDIUM; HIGH.
WDR Control:
Press Enter to show the menu, move the cursor to WDR Control:
D/N Control:
Move cursor to D/N Control by Up and Down button, set D/N by
Left and Right button as: NIGHT;AUTO; GPIO; DAY.
LANGAGE SELECT:
Move cursor to LANGAGE SELECT by Up and Down button,
set by Left and Right button as
:
ENGLISH; CHINESE.
SYNC Mode
White
Balance
Voltage
Current
Lens
IR range
Working Temp.
Size
Weight
Mode
Range
PAL/NTSC
INTERNAL
690HTVL-E
SW-520C
SW-520
≥
50dB
（
AGC off
）
ATW Normal; ATW Desat; ATW Xtnd; AWB
D/N
Night; Day; GPIO; Auto
S
e
n
so
r
M
e
n
u C
o
n
tr
o
l
P
o
w
e
r
0Lux (IR ON)
0.1Lux
<150mA
<400mA
1400g
1350g
* Specification is subject to change without prior notice
150
（
H)*185(
Φ
)mm
4-9mm
----
20m
Video out
1.0Vp-p/75ohm
Weatherproof standard
Model
Sensor
Video Format
Resolution
Mini illumination
S/N Ratio
Medium; normal; low; high
ON; OFF
Day AGC; Night AGC
WDR control
BLC
AGC
（
）
2200~10000 K
Auto White Balance
°
DC12V
-10
℃
~50
℃
Ip55
1/3" Pixim DPS Sensor
1
1
5
1
5
0
185.5
132
Horizontal Rotation 355
°
Vertical Rotation45
°
dipping rotation355
°
When your camera is fixed to the wall, you can adjust camera
’
s
three-dimensional bracket to the angle you need.
1.Horizontally rotating angle 355
°
(Bracket panel and main board installing
panel can both be rotated.)
2.Ver tically rotating angle 45
°
Adjust
the lens focal length to the position you
need and adjust the lens focus again to
get a clear picture.
1
3
2
1.
.
.
Before Installation
Make sure the installation position can bear a weight 5 times heavier than the
camera you are about to install.
2 Do not have the cable in an improper place or broken, otherwise, these may
cause a fire.
3 When installing the camera, please properly install it.
